Explanation:
We can write Newton's 2nd law as applied to the sliding mass [tex]m_1[/tex] as
[tex]T - m_1g\sin38 = m_1a\:\:\:\:\:\:\:(1)[/tex]
For the hanging mass [tex]m_2,[/tex] we can write NSL as
[tex]T - m_2g = -m_2a\:\:\:\:\:\:\:(2)[/tex]
We need to solve for a first before we can solve the tension T. So combining Eqns(1) & (2), we get
[tex](m_1 + m_2)a = m_2g - m_1g\sin38[/tex]
or
[tex]a = \left(\dfrac{m_2 - m_1\sin38}{m_1 + m_2}\right)g[/tex]
[tex]\:\:\:\:= 0.30\:\text{m/s}^2[/tex]
Using this value for the acceleration on Eqn(2), we find that the tension T is
[tex]T = m_2(g - a) = (2.6\:\text{kg})(9.51\:\text{m/s}^2)[/tex]
[tex]\:\:\:\:=24.7\:\text{N}[/tex]
A block with a mass of 0.26 kg is attached to a horizontal spring. The block is pulled back from its equilibrium position until the spring exerts a force of 1.2 N on the block. When the block is released, it oscillates with a frequency of 1.4 Hz. How far was the block pulled back before being released?
Answer:
2
Explanation:
pulling force because of it force
Answer:
5.9 cm
Explanation:
f: frequency of oscillation
frequency of oscillationk: spring constant
frequency of oscillationk: spring constantm: the mass
[tex]f = \frac{1}{2\pi} \sqrt{ \frac{k}{m} } [/tex]
in this problem we know,
F= 1.4 Hz
m= 0.26 kg
By re-arranging the formula we get
[tex]k = {(2\pi \: f )}^{2} m = {(2\pi(1.4hz))}^{2} 0.26kg = 20.1 \frac{n}{m} [/tex]
The restoring force of the spring is:
F= kx
where
F= 1.2 N
k= 20.1 N/m
x: the displacement of the block
[tex]x = \frac{f}{k} = \frac{1.2 \: n}{20.1 \frac{n}{m} } = 0.059m \: = 5.9 \: cm[/tex]
A regulation soccer field for international play is a rectangle with a length between 100 m and a width between 64 m and 75 m. What are the smallest and largest areas that the field could be?
Answer:
The smallest and largest areas could be 6400 m and 7500 m, respectively.
Explanation:
The area of a rectangle is given by:
[tex] A = l*w [/tex]
Where:
l: is the length = 100 m
w: is the width
We can calculate the smallest area with the lower value of the width.
[tex] A_{s} = 100 m*64 m = 6400 m^{2} [/tex]
And the largest area is:
[tex] A_{l} = 100 m*75 m = 7500 m^{2} [/tex]
Therefore, the smallest and largest areas could be 6400 m and 7500 m, respectively.
I hope it helps you!
Answer:
the largest areas that the field could be is [tex]A_l[/tex]=7587.75 m
the smallest areas that the field could be is [tex]A_s[/tex]=6318.25 m
Explanation:
to the find the largest and the smallest area of the field measurement error is to be considered.
we have to find the greatest possible error, since the measurement was made nearest whole mile, the greatest possible error is half of 1 mile and that is 0.5m.
therefore to find the largest possible area we add the error in the mix of the formular for finding the perimeter with the largest width as shown below:
[tex]A_l[/tex]= (L+0.5)(W+0.5)
(100+0.5)(75+0.5) = (100.5)(75.5) = 7587.75 m
To find the smallest length we will have to subtract instead of adding the error factor value of 0.5 as shown below:
[tex]A_s[/tex]= (L-0.5)(W-0.5)
(100-0.5)(64-0.5) = (99.5)(63.5) = 6318.25 m
Using the given temperature and pressures, determine: a) the diameter of the water scale model balloon (m), b) the weight of the scale model, c) the specific gravity of the buoyant material such that the model conditions will be similar to the full-scale balloon.
Complete Question
Complete Question is attached below
Answer:
a) [tex]D=0.7[/tex]
b) [tex]W=1787.5N[/tex]
c) [tex]\rho'=998.19kg/m^3[/tex]
Explanation:
From the question we are told that:
Hot air:
Temperature [tex]T_a=360K[/tex]
Pressure [tex]P_a=100kPa[/tex]
Distance [tex]d=12m[/tex]
Weight [tex]W=1400N[/tex]
Water:
Temperature [tex]T_w=300K[/tex]
Pressure [tex]P_w=100kPa[/tex]
Since we have The same Reynolds number
a)
Generally the equation for equal Reynolds number is mathematically given by
Re_{air}=Re_{water}
Therefore
[tex]\frac{\rho V D}{\mu_{air}}=\frac{p_{water}*V*D}{\mu_{water]}}[/tex]
[tex]\frac{100*12}{300*0.28*1.81*10^{-3}}}=\frac{998*D}{0.000890}[/tex]
[tex]D=0.7[/tex]
b)
Generally the equation for Weight of scale is mathematically given by
[tex]W=\rho*V*g[/tex]
[tex]W=998*\frac{4}{3}*\pi*0.35^3*9.81[/tex]
[tex]W=1787.5N[/tex]
c)
Generally the equation for Density of buoyant material is mathematically given by
[tex]\rho'=\frac{w}{g*V}[/tex]
[tex]\rho'=\frac{1781.5}{\frac{4}{3}*\pi*0.35^3*9.81}[/tex]
[tex]\rho'=998.19kg/m^3[/tex]
Katie swings a ball around her head at constant speed in a horizontal circle with circumference 2.1 m. What is the work done on the ball by the 34.4 N tension force in the string during one half-revolution of the ball
Answer:
the work done on the ball is 0
Explanation:
Given the data in the question;
Katie swings a ball around her head at constant speed in a horizontal circle with circumference 2.1 m.
circle circumference = 2πr = 2.1 m
radius r will be; r = 2.1 m / 2π = 0.33 m
Tension force = 34.4 N
one half revolution means, displacement of the ball is;
d = 2r = 2 × 0.33 = 0.66 m
Now, Work done = force × displacement × cosθ
we know that, the angle between the tension force on string and displacement of object is always 90.
so we substitute
Work done = 34.4 N × 0.66 m × cos(90)
Work done = 34.4 N × 0.66 m × 0
Work done = 0 J
Therefore, the work done on the ball is 0
A cylinder that is 18 cm tall is filled with water. If a hole is made in the side of the cylinder, 5.0 cm below the top level. Assume that the cylinder is large enough so that the level of the water in the cylinder does not drop significantly. How far will the stream land from the base of the cylinder?
Answer:
The distance is 22.45 cm.
Explanation:
Height of cylinder, H = 14 cm
depth of hole, h = 5 cm
The distance of landing of stream from the base of cylinder is
[tex]R = 2\sqrt{H(H-h)}\\\\R = 2\sqrt{14(14-5)}\\\\R = 22.45 cm[/tex]
A skateboarder travels on a horizontal surface with an initial velocity of 3.6 m/s toward the south and a constant acceleration of 1.8 m/s^2 toward the east. Let the x direction be eastward and the y direction be northward, and let the skateboarder be at the origin at t=0.
a. What is her x position at t=0.60s?
b. What is her y position at t=0.60s?
c. What is her x velocity component at t=0.60s?
d. What is her y velocity component at t=0.60s?
Answer:
a) The x-position of the skateboarder is 0.324 meters.
b) The y-position of the skateboarder is -2.16 meters.
c) The x-velocity of the skateboard is 1.08 meters per second.
d) The y-velocity of the skateboard is -3.6 meters per second.
Explanation:
a) The x-position of the skateboarder is determined by the following expression:
[tex]x(t) = x_{o} + v_{o,x}\cdot t + \frac{1}{2}\cdot a_{x} \cdot t^{2}[/tex] (1)
Where:
[tex]x_{o}[/tex] - Initial x-position, in meters.
[tex]v_{o,x}[/tex] - Initial x-velocity, in meters per second.
[tex]t[/tex] - Time, in seconds.
[tex]a_{x}[/tex] - x-acceleration, in meters per second.
If we know that [tex]x_{o} = 0\,m[/tex], [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{x} = 1.8\,\frac{m}{s^{2}}[/tex], then the x-position of the skateboarder is:
[tex]x(t) = 0\,m + \left(0\,\frac{m}{s} \right)\cdot (0.60\,s) + \frac{1}{2}\cdot \left(1.8\,\frac{m}{s^{2}} \right) \cdot (0.60\,s)^{2}[/tex]
[tex]x(t) = 0.324\,m[/tex]
The x-position of the skateboarder is 0.324 meters.
b) The y-position of the skateboarder is determined by the following expression:
[tex]y(t) = y_{o} + v_{o,y}\cdot t + \frac{1}{2}\cdot a_{y} \cdot t^{2}[/tex] (2)
Where:
[tex]y_{o}[/tex] - Initial y-position, in meters.
[tex]v_{o,y}[/tex] - Initial y-velocity, in meters per second.
[tex]t[/tex] - Time, in seconds.
[tex]a_{y}[/tex] - y-acceleration, in meters per second.
If we know that [tex]y_{o} = 0\,m[/tex], [tex]v_{o,y} = -3.6\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{y} = 0\,\frac{m}{s^{2}}[/tex], then the x-position of the skateboarder is:
[tex]y(t) = 0\,m + \left(-3.6\,\frac{m}{s} \right)\cdot (0.60\,s) + \frac{1}{2}\cdot \left(0\,\frac{m}{s^{2}}\right)\cdot (0.60\,s)^{2}[/tex]
[tex]y(t) = -2.16\,m[/tex]
The y-position of the skateboarder is -2.16 meters.
c) The x-velocity of the skateboarder ([tex]v_{x}[/tex]), in meters per second, is calculated by this kinematic formula:
[tex]v_{x}(t) = v_{o,x} + a_{x}\cdot t[/tex] (3)
If we know that [tex]v_{o,x} = 0\,\frac{m}{s}[/tex], [tex]t = 0.60\,s[/tex] and [tex]a_{x} = 1.8\,\frac{m}{s^{2}}[/tex], then the x-velocity of the skateboarder is:
[tex]v_{x}(t) = \left(0\,\frac{m}{s} \right) + \left(1.8\,\frac{m}{s} \right)\cdot (0.60\,s)[/tex]
[tex]v_{x}(t) = 1.08\,\frac{m}{s}[/tex]
The x-velocity of the skateboard is 1.08 meters per second.
d) As the skateboarder has a constant y-velocity, then we have the following answer:
[tex]v_{y} = -3.6\,\frac{m}{s}[/tex]
The y-velocity of the skateboard is -3.6 meters per second.
A spherical balloon has a radius of 7.15 m and is filled with helium. The density of helium is 0.179 kg/m^3, and the density of air is 1.29 kg/m^3. The skin and structure of the balloon has a mass of 910 kg. Neglect the buoyant force on the cargo volume itself.
Determine the largest mass of cargo the balloon can lift.
The largest mass of cargo the balloon can lift is 791.06 kg
First, we need to calculate the mass of helium.
Since the radius of the spherical balloon is r = 7.15 m, its volume is V = 4πr³/3.
The volume of the balloon also equals the volume of helium present.
Now, the mass of helium m = density of helium, ρ × volume of helium, V
m = ρV
Since ρ = 0.179 kg/m³
m = ρV
m = ρ4πr³/3.
m = 0.179 kg/m³ × 4π(7.15 m)³/3
m = 0.179 kg/m³ × 4π(365.525875 m³)/3
m = 0.179 kg/m³ × 1462.1035π m³/3
m = 261.7165265π/3 kg
m = 822.207/3 kg
m = 274.07 kg
Since the mass of the skin and structure of the balloon is 910 kg, the total mass, M of the balloon = mass of skin and structure + mass of helium gas is 910 kg + 274.07 kg = 1184.07 kg.
The weight of this mass W = Mg where g = acceleration due to gravity.
The buoyant force on the balloon due to the air is the weight of air displaced, W' = mass of air, m' × acceleration due to gravity, g.
W' = m'g
Now, the mass of air m' = density of air, ρ' × volume of air displaced, V'
We know that the volume of air displaced, V' = volume of balloon, V
So, V' = V = 4πr³/3.
Since the density of air, ρ' = 1.29 kg/m³,
m' = ρ'V
m = 1.29 kg/m³ × 4π(7.15 m)³/3
m = 1.29 kg/m³ × 4π(365.525875 m³)/3
m = 1.29 kg/m³ × 1462.1035π m³/3
m = 1886.113515π/3 kg
m = 5925.4/3 kg
m = 1975.13 kg
So, the net weight W" that the balloon can lift is W" = W' - W = m'g - Mg = (m' - M )g = (1975.13 kg - 1184.07 kg)g = 791.06g.
So, the net mass m" = W"/g = 791.06g/g = 791.06 kg
This net mass is the largest mass of cargo that the balloon can lift.
Thus, the largest mass of cargo the balloon can lift is 791.06 kg
Learn more about balloons here:
https://brainly.com/question/21890581
Two loudspeakers emit sound waves along the x-axis. The sound has maximum intensity when the speakers are 21 cm apart. The sound intensity decreases as the distance between the speakers is increased, reaching zero at a separation of 61 cm. a. What is the wavelength of the sound
Answer:
The answer is "80 cm".
Explanation:
The distance of 21 cm between the speaker's effect of high strength but a spacing of 61 cm corresponds to a zero to zero intensity, that also is, the waves are all in phase with others [tex]\Delta \ x_1 = 21 \ cm[/tex] this is out of phase [tex]\Delta\ x_2 = 61\ cm[/tex]
[tex]\therefore\\\\\Delta\ x_2 -\Delta\ x_1 = \frac{\lambda}{2}\\\\\lambda= 2( \Delta\ x_2 -\Delta\ x_1)[/tex]
[tex]= 2 ( 61\ cm - 21\ cm)\\\\ = 2(40\ cm)\\\\= 80\ cm[/tex]
How much energy is stored in a spring that is compressed 0.650m if the spring constant is 725N/m?
Answer:
53.8Joule
Explanation:
hope it is helpful
please mark it as brainliest
Answer:
approximate 153.1J
Explanation:
W= 1/2k(x^2) = 1/2x725x(0.650)^2 = 153.15625 (J)
You want to swim from one side of a river to another side. Assume your speed is three miles per hour in the west direction, with negligible water velocity. When you reach a certain point, you will encounter water flow with a velocity of 6.2 miles per hour in the north direction. What is your resultant speed and direction
Answer:
speed = 6.71 mph and angle is 71.2 degree.
Explanation:
speed of person, u = 3 miles per hour
speed of water, v = 6 miles per hour
Resultant speed
[tex]V =\sqrt{v^2 + u^2}\\\\V = \sqrt{3^2 + 6^2}\\\\V = 6.71 mph[/tex]
The angle from the west is
tan A = 6/2 = 3
A = 71.6 degree
1. A body moving with uniform acceleration of 10 m/s2 covers a distance of 320 m. if its initial velocity was 60 m/s. Calculate its final velocity.
Answer:
v² = u² + 2as
v² = 3600 + 6400
v² = 10000
v = 100
Explanation:
final velocity is 100 m/s
According to third equation of kinematics
[tex]\boxed{\sf v^2-u^2=2as}[/tex]
[tex]\\ \sf\longmapsto v^2=u^2+2as[/tex]
[tex]\\ \sf\longmapsto v^2=(60)^2+2(10)(320)[/tex]
[tex]\\ \sf\longmapsto v^2=3600+3400[/tex]
[tex]\\ \sf\longmapsto v^2=10000[/tex]
[tex]\\ \sf\longmapsto v=\sqrt{10000}[/tex]
[tex]\\ \sf\longmapsto v=100m/s[/tex]
Light of the same wavelength passes through two diffraction gratings. One grating has 4000 lines/cm, and the other one has 6000 lines/cm. Which grating will spread the light through a larger angle in the first-order pattern
Answer:
6000 lines/cm
Explanation:
From the question we are told that:
Grating 1=4000 lines/cm
Grating 2=6000 lines/cm
Generally The Spread of fringes is Larger when the Grating are closer to each other
Therefore
Grating 2 will spread the the light through a larger angle in the first-order pattern because its the closest with 6000 lines/cm
Which of the following is true about resistivity of any given metal? depends on its temperature. varies nearly linearly with temperature. has units of ohm-meter. A. II and III only B. I and II only C. I and III only D. I, II and III E. III only
___________________
[tex]\huge{\underline{\sf{\blue{Answer}}}}[/tex]
___________________
[tex]\sf{C. \:I\: and \:III}[/tex]
___________________
The correct statements about resistivity of any given metal are The resistivity of metal is more than that of insulators and Metals can carry electricity more easily than insulators. Option a and c are correct answer.
Resistivity is a property that quantifies how strongly a material opposes the flow of electric current. Metals have lower resistivity compared to insulators. This means that metals allow electric current to flow more easily than insulators.
Due to their lower resistivity, metals have higher electrical conductivity and can carry electric current more easily compared to insulators. Insulators, on the other hand, have high resistivity and hinder the flow of electric current. Resistivity is a material-specific property and varies for different substances. Metals, such as copper or aluminum, have low resistivity and are often used as conductors for transmitting electricity. Insulators, such as rubber or plastic, have high resistivity and are used to prevent the flow of electricity.
Learn more about Resistivity here:
https://brainly.com/question/13735984
#SPJ2
The complete question is, "Which of the following statements are true about resistivity of any given metal?
A. The resistivity of metal is more than that of insulators.
B. The insulators and metals have same resistivity.
C. Metals can carry electricity more easily than insulators.
D. The resistivity of insulators is more than that of metals.
True or false : conservation of energy gives a relationship between the speed of a falling object and the height from which it was dropped
Answer:
truee
Explanation:
Una persona de 76 kg está siendo retirada de un edificio en llamas mientras se muestra en la figura. Calcule la tensión
en las dos cuerdas si la persona está momentáneamente inmovil.
Ayuda por favor.
Answer:
T1 = 736.6 N, T2 = 193.5 N
Explanation:
W = 76 N
The tension is T1 and T2.
By use of Lami's theorem
[tex]\frac{T_1}{Sin100}=\frac{T_2}{Sin165}=\frac{W}{Sin 95}\\\\So, \\\\T_1 = \frac{76\times 9.8\times Sin 100}{Sin 95} = 736.6 N \\And\\T_2 = \frac{76\times 9.8\times Sin 165}{Sin 95} = 193.5 N \\[/tex]
The time delay between transmission and the arrival of the reflected wave of a signal using ultrasound traveling through a piece of fat tissue was 0.13 ms. At what depth did this reflection occur? (The average propagation speed for sound in body tissue is 1540 m/s)
Answer:
10.01 cm
Explanation:
Given that,
The time delay between transmission and the arrival of the reflected wave of a signal using ultrasound traveling through a piece of fat tissue was 0.13 ms.
The average propagation speed for sound in body tissue is 1540 m/s.
We need to find the depth when the reflection occur. We know that, the distance is double when transmitting and arriving. So,
[tex]v=\dfrac{2d}{t}\\\\d=\dfrac{vt}{2}\\\\d=\dfrac{1540\times 0.13\times 10^{-3}}{2}\\\\d= $$0.1001\ m[/tex]
or
d = 10.01 cm
So, the reflection will occur at 10.01 cm.
Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.
The comparison of the speeds and kinetic energy of the identical balls are as follows
The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal
The reason for the above comparison results areas follows;
Known parameters;
First ball is thrown straight up
Second ball is thrown 30° above the horizontal
Third ball it thrown 30° below the horizontal
The fourth ball is thrown straight down
Unknown:
Comparison of the speed and kinetic energy of the four balls
Method:
The kinetic energy, K.E. = (1/2) × m × v²
The velocity of the ball, v = u × sin(θ)
Where;
u = The initial velocity of the ball
θ = The reference angle
For the first ball thrown straight up, we have;
θ = 90°
∴ [tex]v_y[/tex] = u
The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh
Where;
h = The height of the cliff
∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²
For the second ball thrown 30° to the horizontal, we have;
K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²
Kinetic energy K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²
For the third ball thrown at 30° below the horizontal, we have;K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²
Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²
For the fourth ball thrown straight down, we have;Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²
Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal
u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃
Learn more about object kinetic energy of objects in free fall here;
https://brainly.com/question/14872097
A Ball A and a Ball B collide elastically. The initial momentum of Ball A is -2.00kgm/s and the initial momentum of Ball B is -5.00kgm/s. Ball A has a mass of 4.00kg and is traveling at 2.50 m/s after the collision. What is the velocity of ball B if it has a mass of 6.50kg?
The velocity of B after the collision is obtained as -2.6 m/s.
What is the principle of conservation of momentum?Now we now that the principle of conservation of momentum states that the momentum before collision is equal to the momentum after collision.
Thus;
(-2.00kgm/s) + ( -5.00kgm/s) = ( 4.00kg * 2.50 m/s) + ( 6.50kg * v)
-7 = 10 + 6.5v
-7 - 10 = 6.5v
v = -7 - 10 /6.5
v = -2.6 m/s
Hence, the velocity of B after the collision is obtained as -2.6 m/s.
Learn more about elastic collision:https://brainly.com/question/5719643
#SPJ1
In the lab room, you are sitting in an office chair with wheels while holding onto a force sensor, and the chair is at rest. One end of a lightweight string is attached to the force sensor, and your lab partner is holding the other end of the string. Your lab partner then moves away from you, pulling on the string. Describe how your lab partner must move for the force sensor to read a constant force. Explain
Answer:
a circular motion a constant force can be measured
Explanation:
The force is expressed by the relation
F = m a
The bold are vectros.
Therefore, when your partner moves away, he has a reading of a force, so that this force remains constant there must be an acceleration at all times, one way to achieve these is with a circular motion with constant speed, in this case the module of the velocity is constant, but the direction changes at each point and there is an acceleration at each point.
Consequently with a circular motion a constant force can be measured
The force depends on the acceleration, hence the force will be constant during the circular motion for constant acceleration.
What is Force?A force can be defined as an influence that can change the motion of an object. The force is expressed by the relation
[tex]F = m a[/tex]
The force is dependent on the mass and acceleration of the object. The acceleration is a vector quantity, so the force will be a vector quantity.
Given that, in a lab room, you are sitting on a wheelchair at one end and at the other end, lab partner then moves away from you, pulling on the string that is attached to the force sensor.
When the lab partner moves away and pulled the string, there must be an acceleration during the motion. If the lab partner moves in a circular motion, then the velocity is constant but the direction changes at each point. There is an acceleration at each point that will be constant.
As the force depends on the acceleration, hence the force will be constant during the circular motion for constant acceleration.
To know more about the force, follow the link given below.
https://brainly.com/question/26115859.
An object undergoing simple harmonic motion takes 0.40 s to travel from one point of zero velocity to the next such point. The distance between those points is 50 cm. Calculate (a) the period, (b) the frequency, and (c) the amplitude of the motion.
Answer:
a) [tex]P=0.80[/tex]
b) [tex]1.25Hz[/tex]
c) [tex]A=25cm[/tex]
Explanation:
From the question we are told that:
Travel Time [tex]T=0.40s[/tex]
Distance [tex]d=50cm[/tex]
a)
Period
Time taken to complete one oscillation
Therefore
[tex]P=2*T\\\\P=2*0.40[/tex]
[tex]P=0.80[/tex]
b)
Frequency is
[tex]F=\frac{1}{T}\\\\F=\frac{1}{0.80}[/tex]
[tex]1.25Hz[/tex]
c)
Amplitude:the distance between the mean and extreme position
[tex]A=\frac{50}{2}[/tex]
[tex]A=25cm[/tex]
A long copper wire of radius 0.321 mm has a linear charge density of 0.100 μC/m. Find the electric field at a point 5.00 cm from the center of the wire. (in Nm2/C, keep 3 significant figures)
Answer:
[tex]E=35921.96N/C[/tex]
Explanation:
From the question we are told that:
Radius [tex]r=0.321mm[/tex]
Charge Density [tex]\mu=0.100[/tex]
Distance [tex]d= 5.00 cm[/tex]
Generally the equation for electric field is mathematically given by
[tex]E=\frac{mu}{2\pi E_0r}[/tex]
[tex]E=\frac{0.100*10^{-6}}{2*3.142*8.86*10^{-12}*5*10^{-2}}[/tex]
[tex]E=35921.96N/C[/tex]
a 0.0780 kg lemming runs off a 5.36 m high cliff at 4.84 m/s. what is its kinetic energy when it's 2.00 m above the ground
Answer:
KE_2 = 3.48J
Explanation:
Conservation of Energy
E_1 = E_2
PE_1+KE_1 = PE_2+KE_2
m*g*h+(1/2)m*v² = m*g*h+(1/2)m*v²
(0.0780kg)*(9.81m/s²)*(5.36m)+(.5)*(0.0780kg)*(4.84m/s)² = (0.0780kg)*(9.81m/s²)*(2m)+KE_2
4.10J+0.914J = 1.53J + KE_2
5.01J = 1.53J + KE_2
KE_2 = 3.48J
A hydraulic vane pump has a real flow of 20 liters per minute, a pressure of 230 bar, a pump speed of 1400 rpm. Know that the input power is 10kW and the mechanical efficiency is 88%.
a) Calculate the volumetric efficiency of the pump
b) Calculate the specific volume of the pump (cm/rev). Question 3 (2,5d): Design a pneumatic transmission system to control 02 single-acting cylinders, using 02 reversing valves 3/2 acting by push button, 02 throttle valves - one-way. Describe the working principle of the system.
Explanation:
uxirajifspytdiptig ok lhb rid0
A strontium vapor laser beam is reflected from the surface of a CD onto a wall. The brightest spot is the reflected beam at an angle equal to the angle of incidence. However, fringes are also observed. If the wall is 1.2 m from the CD, and the second bright fringe is 0.803 m from the central maximum, what is the spacing (in m) of grooves on the CD
Answer:
[tex]d=1.29*10^{-6}m[/tex]
Explanation:
From the question we are told that:
Distance of wall from CD [tex]D=1.4[/tex]
Second bright fringe [tex]y_2= 0.803 m[/tex]
Let
Strontium vapor laser has a wavelength \lambda= 431 nm=>431 *10^{-9}m
Generally the equation for Interference is mathematically given by
[tex]y=frac{n*\lambda*D}{d}[/tex]
Where
[tex]d=\frac{n*\lambda*D}{y}[/tex]
[tex]d=\frac{2*431 *10^{-9}m*1.4}{0.803}[/tex]
[tex]d=1.29*10^{-6}m[/tex]
If 56.5 m3 of a gas are collected at a pressure of 455 mm Hg, what volume will the gas occupy if the pressure is changed to 632 mm Hg? *
Assuming ideal conditions, Boyle's law says that
P₁ V₁ = P₂ V₂
where P₁ and V₁ are the initial pressure and temperature, respectively, and P₂ and V₂ are the final pressure and temperature.
So you have
(455 mm Hg) (56.5 m³) = (632 mm Hg) V₂
==> V₂ = (455 mm Hg) (56.5 m³) / (632 mm Hg) ≈ 40.7 m³
A 2.50-W beam of light of wavelength 124 nm falls on a metal surface. You observe that the maximum kinetic energy of the ejected electrons is 4.16 eV. Assume that each photon in the beam ejects a photoelectron. (a) What is the work function (in electron volts) of this metal
Answer:
φ = 13.43 x 10⁻¹⁹ J = 8.4 eV
Explanation:
Using the Einstein's Photoelectric equation:
Energy of Photon = Work Function + Kinetic Energy of Electron
[tex]\frac{hc}{\lambda} = \phi + K.E[/tex]
where,
h = Plank's Constant = 6.625 x 10⁻³⁴ J.s
c = speed of light = 3 x 10⁸ m/s
λ = wavelength = 124 nm = 1.24 x 10⁻⁷ m
φ = work function = ?
K.E = Kinetic Energy of Electrons = (4.16 eV)([tex]\frac{1.6\ x\ 10^{-19}\ J}{1\ eV}[/tex]) = 2.6 x 10⁻¹⁹ J
Therefore,
[tex]\frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{1.24\ x\ 10^{-7}\ m} = \phi + 2.6\ x\ 10^{-19}\\\\\phi=16.03\ x\ 10^{-19}\ J - 2.6\ x\ 10^{-19}\ J[/tex]
φ = 13.43 x 10⁻¹⁹ J = 8.4 eV
A mountain biker takes a jump in a race and goes airborne. The mountain bike is travelling at 10.0 m/s before it goes airborne. If the mass of the front wheel on the bike is 750 g and has radius 35 cm, what is the angular momentum of the spinning wheel in the air the moment the bike leaves the ground?
Answer:
Explanation:
The formula for angular momentum is
L = mvr where L is the angular momentum, m is the mass of the object, v is the velocity of the object, and r is the radius of the object. The problem we have that prevents us from just throwing those numbers in there is that mass has to be in kg and it's not, and radius has to be in meters and it's not.
Changing the mass to kg:
750 g = .750 kg
Changing the radius to m:
35 cm = .35 m
Now we can fill in the variables with their respective values:
L = .750(10.0)(.35) gives us
[tex]L=2.625\frac{kg*m^2}{s}[/tex]
27. The part of the Earth where life exists .
Mesosphere
Stratosphere
Troposphere
Biosphere
Answer:
Biosphere is the part of the earth where life exists.
A 1050 kg car accelerates from 11.3 m/s to 26.2 m/s . What impulse does the engine give?
Answer:
I = 15,645. kg*m/s or 15,645 N*s
Explanation:
I = m(^v)
I = 1050kg((26.2m/s-11.3m/s)
I = 15,645. kg*m/s
Derive the explicit rule for the pattern
3, 0, -3, -6, -9,
