1. Horses with the greatest linear speed on a merry-go-round are located
A) near the center.
B) near the outside.
C) anywhere, because they all move at the same speed.

Answers

Answer 1
near the outside :) hope that helped

Related Questions

A bus covers 10 km in 7 minutes. Find the speed of the bus in km/h

Answers

v = d/t
v = 10 km / 7 minutes
v = 1.4 km/ min
v = ( 1.4 km / min ) * 60
v = 84 km/h

A crate is pulled by a force (parallel to the incline) up a rough incline. The crate has an initial spped shown in the figure below. The crate is pulled a distance of 8.24m on the incline by a force of 150N force. b) What is the speed of the crate after it is pulled the 8.24M? Answer in units of m/s.​

Answers

Answer:

(a) Kinetic energy of the cart is 648.32 J.

(b) Speed of the cart is 11.44 m/s.

Explanation:

From the attached below figure we came to know that,

Mass of the crate is 10 kg (m)

Initial speed of the crate is 1.2 m/s (v)

Coefficient of friction on a rough plane is 0.286 (µ)

Force on the cart is 150 N (F)

The distance which crate is moved (d) is 8.05 m.

Calculation of kinetic energy:

Acceleration of the cart:

We know that,

F = F – m × g × sinθ - µ × m × g × cosθ (F = ma)

m × a =  F – m × g × sinθ - µ × m × g × cosθ

10 × a = 150 – (10 × 9.8 × sin 27) – (0.286 × 10 × 9.8 × cos 27)

10 × a = 150 – 44.49 – 24.97

10 × a = 80.54

Calculation of speed:

Change in kinetic energy = m × a × d

Change in kinetic energy = 10 × 8.054 × 8.05

Change in kinetic energy = 648.32 J

Explanation:

6th grade science If you answer this your the brainiest

Answers

Answer:

8. sketches and models helped the astronauts in their training program as they prepare for their missions

9. before building the Mars lander , students need to sketch their design

What will happen if the birth and death rate increased?

Answers

Answer:

To know what will happen we first need to know if the birth rate is more or if the death rate is more if the birth rate had a sudden increases above the death rate we would likely face population problems on the other hand if the death rate is increased more than the birth rate we would have less population problems and more food and resources but if the birth and death rate were to increase equally there would just be a standstill in the population  

Explanation:

d) A tank with dimensions: 3m x 2m x 2m contains water upto its half
pertion. What is the pressure at the base of the tank? (density of water
= 1000 kg/m3, g= 9.8 m/s2)
(Ans: 9800 Pa)​

Answers

Answer:

P = 9800 [Pa]

Explanation:

In order to calculate the pressure at the bottom, we must use the following formula.

P = Ro*g*h

where:

P = pressure [Pa] (units of pascals)

Ro = density of the water = 1000 [kg/m³]

g = gravity acceleration = 9.8 [m/s²]

h = height = 1 [m] (because its half of the portion, the full height is 2 m)

P = 1000*9.8*1

P = 9800 [Pa]

Why are bridges built with joints in them?

Answers

Joints are essential to provide flexibility in the structure
Also designed to accommodating movement between structures

Answer:

To provide flexibility in the structure to expand and contract temperature variation; also designed to accommodate movement between structures

What is molasses?
dye
sugar
brown candy
brown syrup

I need help fast please I will give you extra points

Answers

Answer: Brown syrup

Explanation:

Answer:

syrup

Explanation:

The addition of electron shells results in _____
from the nucleus.
shielding of electrons
Answer here

Answers

Answer:

shielding of electrons

Explanation:

The addition of electrons shells results in the shielding of electrons away from the nucleus, most importantly the nuclear pull resulting from the charge.

The nucleus pulls electrons to itself due to the net positive charge on it. As more electronic shell is added, the effect of the pull weakens outward. The inner shell experiences the nuclear pull more than the outer shell electrons.

The effect is responsible for a wide range of properties of elements.

How high can a human throw a ball if he can throw it with initial velocity 90 mph.
a144.3 m
b 91.82 m
c 82.45 m
d99.82 m
e45.52 m​

Answers

Answer:

c 82.45 m

Explanation:

To solve this problem, we have to apply the right motion equation.

 Given parameter;

 Initial velocity  = 90mph

 So;

 Using;

      V²  = U² - 2gh ; we can solve this problem

 V is the final velocity = 0mph

U is the initial velocity

g is the acceleration due to gravity

h is the height

 Now insert the parameters and solve;

        We need to convert from mph to m/s

          1 mph  = 0.45m/s

          90mph  = 40.5m/s

    0² = 40.5² - (2 x 9.8 x h)

      0 = 1640.25  - 19.6h

    -1640.25 = -19.6h

           h  = 83.7m

A current of 0.2A flows through a component with a resistance of 40ohms calculate the potential difference

Answers

Answer:

8V

Explanation:

Given parameters:

Current = 0.2A

Resistance  = 40ohms

Unknown:

Potential difference = ?

Solution:

Potential difference is force that drives current in an electric circuit.

According to Ohms law, it is given as;

   V = IR

V is the potential difference

I is the current

R is the resistance

 Now, insert the parameters and solve;

    V = 0.2 x 40  = 8V

Explaination :

Here we have been given with the amount of current which flows through the component that is 0.2A and resistance that is of 40Ω. So we would be using Ohm's law to calculate the potential difference (V).

Ohm's Law :

V = IR

Here,

V is potential difference R is resistance I is current

We have :

R = 40Ω I = 0.2A

Substituting the values :

>> V = 0.2(40)

>> V = (2 / 10) × 40

>> V = 2 × 4

>> V = 8

Therefore,

Potential difference is of 8V.

Carl went on a Euro Trip and was traveling from Spain to Russia. When he looked on the map it said Russia was 7035 km away from Spain. If it took Carl 7 hours to get there, what would his average speed be in meters per second?

Answers

Answer:

The average speed would be 279.167 meters per second.

Explanation:

Speed ​​is the magnitude that expresses the variation in position of an object and as a function of time. In other words, speed is defined as the relationship established between the distance traveled and the time elapsed in the movement of a mobile.

Speed can be calculated using the following expression:

[tex]Speed=\frac{distance}{time}[/tex]

In this case:

distance= 7,035 kmtime= 7 hours

Since the required unit of speed is meter per second, then you convert from km to meters for the case of distance, and from hours to seconds for the case of time. So:

distance= 7,035 km= 7,035,000 m (being 1 km= 1,000 m)time= 7 hours= 420 minutes= 25,200 seconds (being 1 hour=60 minutes and 1 minute=60 seconds)

Replacing in the definition of speed:

[tex]Speed=\frac{7,035,000 meters}{25,200 seconds}[/tex]

Solving:

[tex]Speed=279.167\frac{meters}{ seconds}[/tex]

Then, the average speed would be 279.167 meters per second.

explain how water compared to other substance when it comes to a thermal expansion

Answers

I don’t know that much but I have the same question it’s like weeeeeeeeeeeb

Determine the acceleration of a boat
with a speed of 18 m/s for 20 seconds.

Answers

Answer:

Explanation:

initial velocity, u = 0

final velocity, v = 18 m/s

time = 20 sec

acceleration, a = v - u / t

= 18 - 0 / 20

= 18 / 20

= 9 / 10

= 0.9 m/s^2

Hope this helps

plz mark as brainliest!!!!!!

How many forces are used in a catapult ( please help me asap I have a presentation due tomorrow and. I need help starting

Answers

Answer:

Hey buddy, here is your answer.Hope it helps you.

Explanation:

A catapult is a launching device that allows us to experimentally observe projectile motion. Once the ball is launched, the only forces acting are gravity and air resistance.

You should always wear your seatbelt just in case the car comes to an abrupt stop. The seatbelt will hold you in place so that your body does not continue moving when the car stops.

What property of matter will keep your body in motion when the car comes to a halt?



Group of answer choices

inertia

mass

force

acceleration

Answers

Answer:

inertia

Explanation:

The property of matter that will keep the body in motion when the car comes to a halt is the inertia force.

Inertia is the ability of a body to remain in static position. It is the tendency to remain in a stable condition where there is no motion.

Newton's first law is the law of inertia and it states that a body remain in a state of rest or of uniform motion unless acted upon by an external force. The ability to remain in state of rest by a body is predicated on the force of inertia.

Answer:

inertia

first

Explanation

CAN SOMEONE HELP ME? thank you :)

Answers

Frequency and wavelength have both direct and inverse relationships. If two waves are traveling at the same speed, they are inversely related. The wave with shorter wavelength will have a higher frequency while a longer wavelength will have a lower frequency.

An object with a mass of 6.5 kg accelerates 12.3 m/s2 when an unknown force is applied to it. What is the amount of the force?

Answers

Answer:

79.95 kg

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 6.5 × 12.3

We have the final answer as

79.95 kg

Hope this helps you

What time is it in Orlando, FL when it is 10:00 a.m. in Los Angeles, CA?

7:00 a.m.
1:00 p.m.
2:00 p.m.
10:00 a.m.

Answers

Answer:

1:00 pm

Explanation:

CA is pacific time zone

FL is Eastern

pacific time is 3 hours less

Answer:

1:00 p.m.

Explanation:

Los Angeles, CA is in the Pacific Standard Time zone which is 3 hours behind the Eastern Standard Time zone, the time zone that Orlando, FL is in.

Calculate the average atomic mass of caarbon given the following information: Carbon-12 12.000 amu 98.89%
Carbon-12 13.003 amu 1.11%

Answers

Answer:

12.01

Explanation:

Given parameters:

Abundance of C-12  = 98.89%

mass of isotope  = 12amu

Abundance of C - 12  = 1.11%

mass of isotope  = 13.003

Unknown:

Average atomic mass of carbon  = ?

Solution:

The average atomic mass ;

R.A.M  = (mass of isotope x abundance of isotope)-12 + (mass of isotope x abundance of isotope)- 13

Insert the parameters and solve;

R.A.M  =( 12  x 98.89%)  + (1.11% x 13.003)

 R.A.M = 11.87 + 0.14 = 12.01

A substance burns in the presence of oxygen.
Which answer choice names a chemical property in this scenarlo?
O density
O boiling point
solid formation
O flammability

Answers

If I don’t know a answer I put C bc it is a 50/50 chance but it might be wrong

Answer:

D. flammability

Explanation:

I took the test and got it right

A student spots an unknown sample on a TLC plate. After developing in hexanes/ethyl acetate 50:50, he/she saw a single spot with an Rf of 0.55. Does this indicate that the unknown material is a pure compound? What can be done to verify the purity of the sample?

Answers

Answer:

See explanation

Explanation:

A pure sample is known to give one spot on a chromatogram. This is the first indication that the substance is a pure substance. Since the student saw a single spot, the unknown substance is pure.

Subsequently, the substance can be boiled since it is a liquid. Impure substances boil over a range of temperatures. If the substance is pure, it will have a sharp boiling point which can be compared with boiling points of known substances recorded in literature hence the substance can be correctly identified.

The given unknown material or compound is a pure compound - yes, it has only one spot.

In the given TLC plate there is only one single spot found thus we can say it is the pure compound as If an impurity is present along with the major compound then there we could observe more spots other than the major compound.

The verification of the purity of the sample can be tested by a general procedure

conduct the TLC of the given compound and a separate TLC consisting of the pure compoundcompare the Rf values of both platesif it matches with the Rf value of the pure compound then the given compound is confirmed. the TLC plate has no spots other than the main compound therefore, it is a pure one.

Thus, The given unknown material or compound is a pure compound - yes, it has only one spot.

Learn more:

https://brainly.com/question/14849710

TRUE OR FALSE!!!!!

PLEASE HELP


Igneous rock is formed by volcanoes releasing magma from the mantle, the rock cools and piles up forming a mountain. Rivers direct water to cool magma underground forming metamorphic rock under lake beds.

Answers

Answer:

true

Explanation:

this is true, igneous rocks are formed from molten lava when it cools

Answer: True

Explanation:

Seeing light coming out from a crack in the wall is what type of wave interaction?

A. Reflection
B. Refraction
C. Diffraction
D. Resonance

Answers

Answer:

C

becuase its where a wave (light etc) goes through a narrow area or across an edge of an area

How many significant figures are in 107 moles of sodium

Answers

Answer:

3 significant figures

Explanation:

here  zero is counted as one of the significant figures since it lies next to an integer.

hence the number has 3 sfg

A 12kg cheetah accelerates 24 m/s". What is the force the cheetah needed to run?

Answers

Answer:

288N

Explanation:

Given parameters:

Mass of Cheetah = 12kg

Acceleration  = 24m/s²

Unknown:

Force needed by the cheetah to run  = ?

Solution:

The force needed by the Cheetah to run is the net force.

According to Newton's law;

    Force  = mass x acceleration

Insert the given parameters and solve;

   Force  = 12 x 24  = 288N

Solar-powered cars use energy from the Sun to work. A panel on the car absorbs light energy from the Sun, which
then generates an electric current. This electric current, in turn, allows the car to move. Which shows the correct
order of energy transformations that take place in a solar-powered car?
electrical, chemical, kinetic
electrical, kinetic, radiant
radiant, chemical, electrical
radiant, electrical, mechanical

Answers

Answer: I Believe Its radiant, electrical, mechanical!

Explanation:

Please correct me if i'm wrong!

Answer:

D) radiant, electrical, mechanical Is correct!

Explanation:

Hope this helps! :)

When ionic bonds form compound structures in a solid state, they arrange in latticed, crystalline patterns.
What does this say about the structure of the compound on the molecular level? What does it say about
the properties of that compound?

Answers

Answer:

Structures are determined by two principal factors: the relative sizes of the ions and the ratio of the numbers of positive and negative ions in the compound.

Ionic compounds at a molecular level are arranged in definite patterns to give a crystalline structure leading to a high melting point, high boiling point and high density in ionic compounds.

In ionic bond is formed when a metal transfers electrons to a nonmetal and an ion pair is formed. The ions are held together by strong electrostatic interaction as described by Coulomb's law.

However, the smallest unit of an ionic substance is called the formula unit. The compound arranges itself in definite patterns to form a crystalline lattice. Hence, the structure of ionic compound is highly ordered. This leads to a high melting point, high boiling point and high density in ionic compounds.

Learn more: https://brainly.com/question/14191541

Cookie (the mean cat) runs 20 meters east to kill a bird. He then runs 10 meters
west to bring it back to his owners.
A. What is the distance?
B. What is the displacement?

Answers

distance=30 meters
displacement=10 meters

distance is the overall amount he travelled so 20+10=30 he travelled 30 meters
displacement is how far he is from where he originally started so if he ran 20 meters away but then 10 back he’s only 10 meters away from where he started 20-10=10

pretty sure this is right hope i helped

The mass of a meteoroid was found to be 1.24 × 107 kilograms. Write the mass in standard notation.

Answers

Answer:

The value we are given in the question is 1.24 * 10^7. This form of writing number is called scientific notation. The standard notation is the normal, regular way of writing numbers. Scientific notation and standard notations are interchangeable.

1.24 * 10^7 written in standard notation will be = 1.24 * 10000000 = 12400000.

Thus, the mass of the meteoroid was 12400000 kg.

Explanation:

Which of these charges has the greatest magnitude?
a charge of -5
a charge of -2
a charge of +4
O a charge of +1

Answers

Answer:

a charge of +4

that's how I could understand

Other Questions
States from what geographic region most opposed the 3/5 CompromiseThe SouthThe Mid-Atlantic RegionThe NorthThe Northwest plz help, someone write a paragraph on the excercise you get while playing soccer HELP ASAP!!Inside the Alamo, less than 200 Texans and frontiersmen from Tennesseewere led by________?*William Travis*George Childress *James Fannin *Jim Bowie **Davy Crockett While flipping through one of your textbooks, you come across the map shown above. Based on the characteristics of this map, what can you predict the adjoining text will be about?A. Texas's highway systemB. the rivers of TexasC. the states surrounding TexasD. the distribution of Texas's populations What type of bond will magnesium selenide form?A. A polar covalent bondB. A covalent bondC. A nonpolar covalent bondD. An ionic bond Why did the people come from England to the USA? A force of 49 Newtons is applied to a rock, which causes itto be lifted 2 meters in 5 seconds. How much power isexerted during this time? Which of the bodys systems provides movements of the skeleton, organs, and maintains body temperature and posture? What kinds of sentences should be expanded to include more details?sentences that show what a character is saying or thinkinglong, very descriptive sentences about the settingshort, vague sentences that don't help readers visualizetopic sentences at the beginning of each paragraph What new problem does Brian face in hatchet chapter five To take a weighted average of all the naturally occurring isotopes of an element in order to arrive at an averageatomic mass, you wouldo multiply the mass of each isotope by the decimal fraction representing its abundance naturally, then add all these productstogether.O use the isotope with the largest mass.O use the isotope with the most average mass.o add all the masses of all of the isotopes, then divide by the number of isotopes. what was one result of parliament's passage of the Sugar Act in 1764 Whats an adjective example The half-life of cobalt-60 is 5.26 years. If a sample originally contained 220 grams of this isotope, how many grams would be left after 10.52 years? Solve the system of equations below.y=x-1x+y=3 In 3 to 5 sentences, please explain how Islam began and Muhammads role in the religion of Islam This is Bohr's Model of:A. OxygenB. MagnesiumC. Sulfur plz answer them by number. for example. Number 1 is ANumber 2 is bThank you guys god bless you and your family. Please help me!!!Dont comment if you dont even know the answer its annoying please help me (serious answers please)